Fusion style

An unexpected decision, whatever one may say: pullover and blouse in one model!

• 
• 
• 

SWEET COUPLE
From the blouse and pullover of past seasons you can sew a fashionable thing! Just stitch their halves together.
Tip: the length of the products should be the same.


HOW TO SEW THIS MODEL:
You will need: blouse and pullover (approximately the same length); sewing threads; "magic" tailor's crayon.
Description of work: on each sleeve of the blouse with a “magic” tailor's chalk, draw a vertical line from the shoulder seam to the lower edge of the cuff. On the back of the blouse, draw lines at a distance of 3 cm from the side seams, on the back halves of the sleeves, draw lines at a distance of 3 cm from the seams of the sleeves. The back of the blouse and the back halves of the sleeves should be cut along the drawn lines, at a distance of 1 cm from the shoulder seams and the seam of the stitching of the collar.
On each sleeve of the pullover, draw a vertical line from the shoulder seam to the lower edge of the sleeve. Cut the back of the pullover and the back halves of the sleeves at a distance of 1 cm from the side and shoulder seams (in front), the seams of the sleeves (front halves of the sleeves) and along the drawn lines.
Put the back of the pullover on the shelves of the blouse (fastened), put the sleeves of the pullover on the sleeves of the blouse with the front side to the front side. On each side, with a single line, sew the side seam and the lower seam of the sleeve, then the shoulder seam and the upper seam of the sleeve (with allowances of 1 cm wide).Overlock the seams of each seam and iron on the shelves / sleeves of the blouse.
Stitch the collar into the neck of the pullover.
PHOTO: JAN SHMIDEL.

Watch the video: Why Tom Quayle uses all 4ths tuning for his fusion style. (December 2024).