Lacing: fashion item

Send

A deep sexy cut or cut - lacing created from welt or air loops and leather ribbons will give your dress an exclusive touch.

WESTERN
Reminds cowboys clothes - isn't that so? Add a hat, worn jeans and leather boots to a shirt with leather lacing - and the look is complete!

YOU WILL NEED Denim shirt, leather tape 4 mm wide, 2 m long, marker with self-disappearing paint, sewing threads.
HOW TO MAKE Cut off the buttons from the ledge of the ledge, chop off the ledge face-to-face, sew to the edge along the seams of attaching the slats from the bottom to 20 cm up. On the seamy side, iron the allowances, then wrap the planks inside, iron and sweep. At a distance of 1.5 cm from the ironed bend, make welded loops 1 cm wide: the upper one at a distance of about 3.5 cm below the collar, another 7 loops with an interval of 3.5 cm. Pass the leather tape from bottom to top through the loops crosswise.

BAR
Exquisite detail: a circular knitted ribbon of silk and cashmere as air loops and a cord drawn through them made an ordinary topic on thin straps a designer thing.
YOU WILL NEED Top, round knitted ribbon, non-woven G 785, paper with a raster cell (length of the side of the square 5 mm), tailor's chalk, sewing threads.
STEP 1 On the top, draw a small oblique line of the oval and transfer it to the wrong side. From the wrong side, reinforce the fabric along the cut line with a strip of non-woven fabric. Run cutout. Strengthen the oval from the wrong side with non-woven fabric. Tuck the edges 1 cm and stitch the oval under the neckline. Place paper under the cutout and pin a circular knit ribbon in the shape of air loops.
STEP 2 Each loop should be 2 cells high and 2 cells wide. Carefully stitch the loops on the front side.
STEP 3 When the stitches are sewn on both sides of the cut, carefully remove the paper. Through the loops from top to bottom, pass the circular knitted ribbon crosswise and tie the ends to a bow.